12.19″ Wilwood Forged Dynapro 6 Big Brake Front Brake Kit (Hub)

$1,091.99

Forged Dynapro 6 Big Brake Front Brake Kit (Hub)

DynaPro 6 forged billet calipers are combined with 12.19” diameter rotors for this group of traditional non-ABS spindles on American muscle cars and vintage rods. The enhanced brake capacity and pad performance of the six piston calipers provide an intermediate level alternative to the bigger six piston kits. These kits compliment wheel, tire, and suspension upgrades on all types of custom show and high performance street / strip machines. A full range of caliper finishes and rotor designs enable the builder to personalize the style and optimize the brake performance for each individual application.

 

Compatible Vehicles for this Brake Kit
BRAKE KIT:   Forged Dynapro 6 Big Brake Front Brake Kit (Hub)
SPINDLE TYPE:

Drop Spindle; Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes: Ford Heidts Magnum Force Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

 View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF: .00
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check “Figure 2. Wheel Clearance Diagram” in the installation Instructions below to verify you have adequate wheel clearance for this kit.

 

Notes
1. Kit fits 74-80 Pinto / Mustang II original disc brake spindles only.
2. Kit may fit some 15″ wheels. Check wheel clearance diagram in kit installation instructions before purchase.

 

ds644_wcd-lg.jpg (700×906)

 

How did you hear about us? * 

SKU: RCWFBK-44810742-R Category: Tags: , ,

Description

Kit SummaryOE Hub Offset:.00(Increase / Decrease Track Width)Spindle Type:Drop Spindle Factory Disc SpindleMount Type:LugCaliper Type:6 – Red Powder CoatRotor Diameter:12.19Min Wheel Diameter Req’d*:15*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

 

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

 

Forged Dynapro 6 Big Brake Front Brake Kit (Hub) Assembly Schematic

 

ds644_IPB-lg.jpg (700×375)

 

 

Kit Components & Specifications
Calipers
Left Hand – Part No: 120-13429-RD
Right Hand – Part No: 120-13428-RD
Type: Dynapro 6
Finish Color: Red Powder Coat
Piston Count: 6
Piston 1 Bore (in): 1.62
Piston 2 Bore (in): 1.38
Piston 3 Bore (in): 1.38
Piston Area (In²): 5.06
Piston Type: Stainless
Mount Type: Lug
Brake Pad Plate: 6712
Brake Pad Area (In²): 7.3
Brake Pad Volume (In³): 2.4
Pad Compound: BP-10
Rotors
Left Hand – Part No: 160-5843
Right Hand – Part No: 160-5843
Type: Ultralite HP 32
Style: Plain Face
Surface Finish: Plain
Material: Iron
Outside Diameter (in): 12.19
Width (in): 0.81
Vane Count: 32 V
Design Type: ULHP
Bedded: No
Dynamically Balanced: No
Rotor Hats
Hat – Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter – BC 1:
Stud Diameter – BC 2:
Stud Diameter – BC 3:
Hubs
Hub – Part No: 270-10442
Type: Hub – Vented Rotor Offset
Material: Aluminum
Finish Color: Bare
Mount Style: Adapter
Bolt Circle 1: 5 x 4.50
Bolt Circle 2: 5 x 4.75
Bolt Circle 3:
Stud Diameter – BC 1: 1/2-20
Stud Diameter – BC 2: 1/2-20
Stud Diameter – BC 3:

 

Parts & Accessories
Caliper Parts
O-ring Kit: 130-10535
Replacement Dustboot: N-A
Replacement Piston 1: 200-7520
Replacement Piston 2: 200-7518
Replacement Piston 3: 200-7518
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate – Left Hand: 300-9707
Wear Plate – Right Hand: 300-9707
Pad Retainer: N-A
Bleed Screw Kit: 220-0627
<td “=””>1975 Ford Mustang II

*Brake Lines Needed
220-8307
Hat
Bolt Kit:
Hub
Bolt Kit:

Additional information

Weight 50 lbs
Dimensions 15 × 15 × 17 in

Related products