Go EFI 8 1200HP System 30012

$1,501.20

Description

The Go EFI 8 1200 HP (Power Adder Plus) is the ultimate system for the serious power builder. This system features 8 high-flow injectors and is capable of fueling 1200HP! The Go EFI 8 1200HP is our top of the line system and comes with all of the data-logging, and pro-tuning software as standard features. Plus the Annular Discharge design is increased to 20 jet streams to handle the monster flow of this unit!

This system is capable of 25lbs of boost right out of the box and can be used in a blow thru turbo or blower application – or on a single roots style supercharger. You can also run a single stage of wet nitrous and control your A/F as well as ignition timing. **This kit is suitable for higher horsepower engines while equally at home on your daily driver 383.***Works from 250-1200HP! ***

  • Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a 4-barrel intake manifold.
  • Replacement for any 4-barrel carburetors for engines with 250 HP up to 1200 HP.
  • Use the same size air cleaner you would normally use for your 4-barrel carburetor.
  • Master Kits: FiTech part number 37012

View All 30012 Master Kits
Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into older vehicles that do not require emission controls.

Features

  • 2.5 BAR internal MAP sensor.
  • Suitable for up to 1200hp.
  • (8) Flow matched injectors.
  • (2) Fan control.
  • Blower and turbo ready.
  • Support for Nitrous.
  • Built-in pressure regulator.
  • Ignition timing control.
  • Pro-tuning laptop software.
  • Matte black finish.

Kit Contents

  • (1) Die-cast throttle body.
  • (1) O2 bung kit.
  • (1) Hand-held controller.
  • (1) CTS sensor.
  • (1) Hand-held controller cable.
  • (1) CTS adapter.
  • (1) Windshield mount.
  • (1) Mini USB cable.
  • (1) 4+2-Pin Connector.
  • (1) Return plug.
  • (1) O2 sensor.
  • (1) Gasket kit.

Description

Brand:FiTech Fuel Injection

Manufacturer’s Part Number:30012

Part Type:Fuel Injection Systems

Product Line:FiTech Go EFI 8 Power Adder Plus 1200 HP Fuel Injection Systems

UPC:856291005022

Maximum Horsepower with Gas:1,200

Injection Style:Throttle body

Timing Control Compatible:Yes

Power Adder Compatible:Yes

ECM Included:Yes

Self Tuning:Yes

User Tunable:Yes

EGR:No

Transmission Controller Included:No

Metering Style:Speed density

Intake Manifold Included:No

Multi-Port Fuel Rails Included:No

Throttle Body Included:Yes

Throttle Body Mounting Flange:4-barrel square bore

Venturi Quantity:4

Throttle Body Material:Cast aluminum

Throttle Body Finish:Satin black

Injectors Included:Yes

Calibration Module Included:Yes

Wiring Harness Included:Yes

Oxygen Sensor Included:Yes

Fuel Pump Included:No

Fuel Pressure Regulator Included:Yes

Distributor Included:No

MAP Sensor Included:Yes

IAT Sensor Included:Yes

TPS Sensor Included:Yes

IAC Motor Included:Yes

Quantity:Sold as a kit.

Notes:Boost ready ECU good up to 25 psi. 2.5 Bar MAP sensor

More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the race track, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit’s life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems.

Additional features include:

* Choice of three fuel inlet connections
* Will work with CDI box, but not required to control timing
* Two adjustable fan control switches
* Can be used with an engine-mounted returnless fuel command center
* Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors
* Nitrous and boost timing retard strategies and target A/F options
* Air conditioning idle speed input kick-up
* Many safety features and accessories for nitrous tuning control
* Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous
* Designed for applications making at least 6 inches of vacuum at idle.
* Complete tuning from Pro Laptop software, with 8GB of data-logging

Additional information

Weight 15 lbs
Dimensions 18 × 12 × 8 in
Make Model Year
Chevrolet
Chrysler
Dodge
Ford
Plymouth
Pontiac