Wilwood 10.00″ Dynapro Single Front Drag Brake Kit

$927.29

Dynapro Single Front Drag Brake Kit

DPS Front Drag kits incorporate the newest DynaPro caliper technology in this traditional style front brake kit. DPS kits are built for the common front spindles and aftermarket struts used on four-wheel disc brake drag cars that weigh in under 2,400 pounds. The billet DPS caliper is a fixed mount, two-piston design that mounts directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount lightweight steel rotors combine to provide consistent braking with an average weight savings of 35 pounds over stock drum or disc brakes. Kits include all new hardware, wheel bearings, and seals.

 

Compatible Vehicles for this Brake Kit
BRAKE KIT:   Dynapro Single Front Drag Brake Kit
SPINDLE TYPE:

Factory Disc Spindle; Factory Drum Spindle ;
This Brake Kit is Compatible with the Following Vehicle Makes: Ford Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

 View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF: +.41
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check “Figure 2. Wheel Clearance Diagram” in the installation Instructions below to verify you have adequate wheel clearance for this kit.

 

Notes
1. Kit includes 5 lug hubs. Not applicable to 4 lug vehicles.
2. Kit may fit some 14″ wheels. Check wheel clearance diagram in kit installation instructions before purchase.

 

 

ds214_wcd-lg.jpg (700×906)

 

How did you hear about us? * 

Shipper’s Declaration: * 

All items ship depending on availability. If you have made a purchase or are considering a purchase please understand that if you have selected any shipping method other than “Ground” , i.e. (next day air, 2nd day air, 3rd day air) your order will not arrive on time if the item is not available to ship. To be 100% certain your item will ship in the aforementioned time frame should you choose anything but “Standard Ground” please call us at 800-525-0091 to check item availability even if the item is listed as “In Stock”. If you choose any method but “Standard Ground” and haven’t contacted us to confirm availability understand your order will ship out per the method you chose at checkout when the item becomes available. If you have any further questions please call us. Thank you for your patience during this time.

SKU: 140-1012-D Category: Tag:

Description

Kit Summary
OE Hub Offset: +.41
(Increase / Decrease Track Width)
Spindle Type: Factory Disc Spindle Factory Drum Spindle
Mount Type: Lug
Caliper Type: 2 – Type III Ano
Rotor Diameter: 10.00
Min Wheel Diameter Req’d*: 14
*This Brake Kit may fit 14-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

 

Dynapro Single Front Drag Brake Kit Assembly Schematic

Dynapro Single Front Drag Brake Kit Assembly Schematic
Kit Components & Specifications
Calipers
Left Hand – Part No: 120-9689
Right Hand – Part No: 120-9689
Type: Dynapro Single
Finish Color: Type III Ano
Piston Count: 2
Piston 1 Bore (in): 1.75
Piston Area (In²): 2.40
Piston Type: Stainless
Mount Type: Lug
Brake Pad Plate: 6812
Brake Pad Area (In²): 3
Brake Pad Volume (In³): 1.1
Pad Compound: BP-10
Rotors
Left Hand – Part No: 160-2182
Right Hand – Part No: 160-2182
Type: Drilled Steel Rotor
Style: Drilled
Surface Finish: Black Electro Coat
Material: Steel
Outside Diameter (in): 10.00
Width (in): 0.32
Vane Count: Solid
Design Type: Solid
Bedded: No
Dynamically Balanced: No
Rotor Hats
Hat – Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter – BC 1:
Stud Diameter – BC 2:
Stud Diameter – BC 3:
Hubs
Hub – Part No: 270-7277
Type: Hub – Solid Rotor Offset
Material: Aluminum
Finish Color: Bare
Mount Style: Direct / Adapter
Bolt Circle 1: 5 x 4.50
Bolt Circle 2: 5 x 4.75
Bolt Circle 3:
Stud Diameter – BC 1: 1/2-20
Stud Diameter – BC 2: 1/2-20
Stud Diameter – BC 3:
Parts & Accessories
Caliper Parts
O-ring Kit: 130-2655
Replacement Dustboot: N-A
Replacement Piston 1: 200-7528
Replacement Piston 2: N-A
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate – Left Hand: 300-5875
Wear Plate – Right Hand: 300-5875
Pad Retainer: 300-9786
Bleed Screw Kit: 220-0627
1975 Ford Mustang II

*Brake Lines Needed
220-8307

 

Additional information

Weight 50 lbs
Dimensions 14 × 14 × 14 in

Related products