Mustang II 12.19″ Wilwood Forged Dynalite Big Brake Front Brake Kit (5 x 5 Hub) 140-14530

$1,421.52 – $1,541.73

Forged Dynalite Big Brake Front Brake Kit (5 x 5 Hub)

FDLI Big Brake Front 5 x 5.00″ Hub Kits provide the added advantage of larger diameter brake rotors for traditional spindles on American muscle cars and vintage rods. These kits are specially designed for 5 x 5.00″ bolt circle wheels. Forged billet Dynalite calipers, 12.19” diameter rotors, and high performance Wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on all types of custom show and performance street / strip machines. A full range of options for caliper finish and rotor design provide custom builders with the ability to personalize the style and performance requirements of the mildest to the wildest machines.

 

Compatible Vehicles for this Brake Kit
BRAKE KIT:   Forged Dynalite Big Brake Front Brake Kit (5 x 5 Hub)

SPINDLE TYPE:

Drop Spindle; Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes: Ford Magnum Force Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

 View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF: .00
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check “Figure 2. Wheel Clearance Diagram” in the installation Instructions below to verify you have adequate wheel clearance for this kit.

 

Notes
1. Kit fits 74-80 Pinto / Mustang II original disc brake spindles only.
2. Kit may fit some 15″ wheels. Check wheel clearance diagram in kit installation instructions before purchase.

 

 

^View Custom Caliper Colors^

 

 

ds1221_wcd-lg.jpg (700×906)

 

 

Clear

How did you hear about us? * 

Shipper’s Declaration: * 

All items ship depending on availability. If you have made a purchase or are considering a purchase please understand that if you have selected any shipping method other than “Ground” , i.e. (next day air, 2nd day air, 3rd day air) your order will not arrive on time if the item is not available to ship. To be 100% certain your item will ship in the aforementioned time frame should you choose anything but “Standard Ground” please call us at 800-525-0091 to check item availability even if the item is listed as “In Stock”. If you choose any method but “Standard Ground” and haven’t contacted us to confirm availability understand your order will ship out per the method you chose at checkout when the item becomes available. If you have any further questions please call us. Thank you for your patience during this time.

SKU: WWF140--14530 Categories: , Tag:

Description

Forged Dynalite Big Brake Front Brake Kit (5 x 5 Hub) Assembly Schematic

ds1221_IPB-lg.jpg (700×487)

 

Kit Summary
OE Hub Offset: .00
(Increase / Decrease Track Width)
Spindle Type: Drop Spindle Factory Disc Spindle
Mount Type: Lug
Caliper Type: 4 – Red Powder Coat
Rotor Diameter: 12.19
Min Wheel Diameter Req’d*: 15
*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

 

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

 

Kit Components & Specifications
Calipers
Left Hand – Part No: 120-13844-RD
Right Hand – Part No: 120-13844-RD
Type: Forged Dynalite Internal
Finish Color: Red Powder Coat
Piston Count: 4
Piston 1 Bore (in): 1.75
Piston 2 Bore (in): 1.75
Piston Area (In²): 4.80
Piston Type: Stainless
Mount Type: Lug
Brake Pad Plate: 7112
Brake Pad Area (In²): 6.36
Brake Pad Volume (In³): 2.1
Pad Compound: BP-10
Rotors
Left Hand – Part No: 160-7104-BK
Right Hand – Part No: 160-7103-BK
Type: SRP Drilled Rotor
Style: SRP Drilled & Slotted
Surface Finish: Black Electro Coat
Material: Iron
Outside Diameter (in): 12.19
Width (in): 0.81
Vane Count: 32 V
Design Type: SRP-BLK
Bedded: No
Dynamically Balanced: No
Rotor Hats
Hat – Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter – BC 1:
Stud Diameter – BC 2:
Stud Diameter – BC 3:
Hubs
Hub – Part No: 270-14515
Type: Hub – Vented Rotor Offset
Material: Aluminum
Finish Color: Bare
Mount Style: Adapter
Bolt Circle 1: 5 x 5.00
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter – BC 1: 1/2-20
Stud Diameter – BC 2:
Stud Diameter – BC 3:
Parts & Accessories
Caliper Parts
O-ring Kit: 130-2655
Replacement Dustboot: N-A
Replacement Piston 1: 200-7528
Replacement Piston 2: 200-7528
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate – Left Hand: 300-5875
Wear Plate – Right Hand: 300-5875
Pad Retainer: 180-0055
Bleed Screw Kit: 220-0627

<td “=””>1975 Ford Mustang II

*Brake Lines Needed
220-8307
Hat
Bolt Kit:
Hub
Bolt Kit:

 

 

Additional information

Weight 50 lbs
Dimensions 15 × 15 × 17 in
Choose Configuration:

Red 140-14530-R, Red Drilled and Slotted 140-14530-DR, Black 140-14530, Black Drilled and Slotted 140-14530-BD
Make Model Year
Ford Calienta 1960 - 1977
Ford Cougar 1964 - 1973
Ford Fairlane 1962 - 1970
Ford Falcon 1960 - 1971
Ford Maverick 1970 - 1977
Ford Mercury Comet 1960 - 1977
Ford Mercury Cyclone 1966 - 1971
Ford Mercury Montego 1966 - 1971
Ford Mustang 1964 - 1973
Ford Rambler 1966 - 1969
Ford Ranchero 1960 - 1971
Ford Torino 1966 - 1971
Ford Wagon 1960 - 1965

You may also like…

Related products